 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Multi-Meter Power Monitor
Description
All electronic, microprocessor controlled,
multi-meter containing 15 individual watthour/demand
meters providing all essential features and information
for remote tenant reading and billing and/or energy
monitoring applications, and much more.
Technical Specifications
Accuracy
ANSI C12.16 Electronic Meter Standards to .05%
Power Input
Types:
2-wire or 3-wire single phase
3-phase, 4-wire WYE
3-phase, 3-wire DELTA
Voltages: 120V, 240V,
120/240V
120/208V, 277/480V
Frequency: 60Hz
(other configurations available, please inquire)
Operating Ranges
Voltage:
+/- 20% of rated voltage
Current:
100mA secondary
Frequency: 57Hz to 63Hz
Temperature: -40 C to +85 C
Humidity: 0 to 95%
non-condensing
Non-Volatile Memory
32k ROM, 512 bytes EEPROM, 32k RAM
Data is stored and secured in the event of a power
failure for a minimum of 6 months
Liquid Crystal Display
Preprogrammed at factory to display automatically and
sequentially every 5 seconds: kWh, kW (15 or 30 minute
integration interval). Additional programmable
display: meter #, serial #, location code, voltage per
phase, current per phase, time-of-day output.
Time-Of-Day Recording
Up to 3 time periods (user programmable)
Installation
Potential Wire Type/Sizes: 14
to 18 gauge, solid or stranded
Data
Cable: 22 gauge, 4 conductor,
600v socket, UL approved
Current Transformer Wire: 14 to
20 gauge
Enclosure 15” x 2” x 3” surface mount, steel,
lockable, hinge corner
Other Outstanding Features
Field Programmable, RS-232 communications, RS-422
communications, password protected, spike and surge
protected, fuse protected circuitry, real time clock.
Note: Specifications are subject to change without notice due to circumstances and availability of materials beyond our control. However, basic specifications regarding operation and accuracy will be maintained at all times.
For pricing and availability, please phone, fax or e-mail us.
Copyright
May 2004 Computerized Meter Manufacturing
Corp. All rights reserved.